Cracking open slabs!
I would like to hear how others crack open slabs. I have only done this once. I used a dremel and made a number of cuts around the outer circle/ seal on a PCGS type slab. Then I carefully removed the cut piece with a needlenose pliers and then very carefully removed the coin. No harm was done, but the potential sure is there when opening these slabs.
I did a forum search on here to see if there were any posts on this subject. Not finding any, I decided to start this thread. Comments and advice are appreciated!
Last edited by Loupe 79; 05-01-2013 at 11:12 PM.